- Home
0.03-2.52mm copper cable wire bunching twisting stranding machine
Main performance parameters of FC-650B automatic high speed bunching machine (replace of the capstan wheel to change the lay length).
1.Usage:It is applied to the stranding of bare copper wire, tinned wire, copper covered aluminum wire, lacquer wire and alloy wire and so on. 1+6 may twist instead of bunching.
2.Diameter of single copper wire: φ0.16~φ1.04mm
3.Outer diameter of wire: φ0.84~φ3.2mm;
4.Cross section area: φ0.40~φ6mm2
5.Size of take up spool: φ630mm×430mm×φ125mm(according to client’s drawings to make).
6. Maximum rotating speed:2000rpm(4000twist),in normal working speed1800rpm(3600twist).
7.Type of traverse: φ30mm rolling ring traverse, winding pitch and breadth are adjustable.
8. Standard lay length: 34 section 11.6~100mm (enclose list of standard lay length).
9. Main motor: 7.5KW AC motor +frequency converter
10. Weight of copper load: about 400kg
11. Direction of strand: optional for right or left, only need to pull the reverse rod of the traverse by hands to adjust the lay-length, easy to operate.
12. Brake: electromagnetic brake for external break, automatic stop when wire reach setting meter.
13. Tension control: take up tension is controlled by magnetic powder clutch, PLC follows up and regulates tension constant tension.
14. Whole machine drive bearing:main shaft is from Sweden SKF bearing,other is adopted imported Japan NSK bearing.
15. Synchronization strap: with imported from American.
16. Spool from top to bottom:electric lifting.
17. Way of spindle lubrication:auto oil.
18. Index of noise: lower than 82dB
19. Dimension: 3300L×1450W×1650H(mm)
20. Weight: 4500Kg
-
FC-650B
-
FUCHUAN
Equipment model
FC-500B
FC-650B
FC-650B modified
FC-800B
Twisting usage
Apply for the twisting of above seven pcs of bare copper wires,tinned wires,silver jacketed wires and enamelled wires)double twisting for core wire
Single wire dia(mm)
0.08-0.45
0.15-1.04
0.38-1.7
0.38-1.7
Stranding section area
0.05-2.5
0.35-6.0
1.0-16
Core wire dia
0.5-1.5
0.5-3.0
1.5-4.0
1.5-4.0
Twisted outer dia
1.0-3.0
1.6-6.0
3.0-8.0
pitch
6.3-52.3
11.6-100
20-160
23-160
Direction of lay:free option to S Z
Take up size
400-500
500-630
630-800
Max speed
3000(6000TPM)
2000(4000TPM)
1600(3200TPM)
power
5.5KW
7.5KW
11KW
15KW
Tension control method:touchscreen+PLC+magnetic powder clutch,ensure constant tension from empty to full bobbin
Magnetic powder
1.2kgf
5kgf
10kgf
10kgf
protection
Internal and outer wire cut off automatic brake(electromagnetic brake).automatic shut down when the meters reaches
Traversing method
Precious traverse or screw type polish wire traverse,winding pitch and width are adjustable
Equipment model
FC-500B
FC-650B
FC-650B modified
FC-800B
Twisting usage
Apply for the twisting of above seven pcs of bare copper wires,tinned wires,silver jacketed wires and enamelled wires)double twisting for core wire
Single wire dia(mm)
0.08-0.45
0.15-1.04
0.38-1.7
0.38-1.7
Stranding section area
0.05-2.5
0.35-6.0
1.0-16
Core wire dia
0.5-1.5
0.5-3.0
1.5-4.0
1.5-4.0
Twisted outer dia
1.0-3.0
1.6-6.0
3.0-8.0
pitch
6.3-52.3
11.6-100
20-160
23-160
Direction of lay:free option to S Z
Take up size
400-500
500-630
630-800
Max speed
3000(6000TPM)
2000(4000TPM)
1600(3200TPM)
power
5.5KW
7.5KW
11KW
15KW
Tension control method:touchscreen+PLC+magnetic powder clutch,ensure constant tension from empty to full bobbin
Magnetic powder
1.2kgf
5kgf
10kgf
10kgf
protection
Internal and outer wire cut off automatic brake(electromagnetic brake).automatic shut down when the meters reaches
Traversing method
Precious traverse or screw type polish wire traverse,winding pitch and width are adjustable
tinned wire twisting ccal wire making enamelled wire bunching alloy wire bunching copper cable wire making High Speed Annealing Tinning Machine High Speed Extrusion Machine Series For Cantilever Type Single Twist (Cable Laying) Machine High Speed Bunching Machine High Speed Ultra Fine Wire Bunching Machine
